Valvewerk + Redline Valve Two tube preamps, one price - $38 individually, $19 together, through Thursday only Valvewerk + Redline Valve - $19 through Thursday
$19 Get Both → Through Thursday
Curve Appeal VST3 dual tube program equalizer with four VU meters

"Thick, huge and closest to the hardware units than any I've heard."

- Philippe W., Producer / Engineer · Paris, France
Dual Tube Program Equalizer

Curve Appeal

The curve everyone's been chasing.

Boost and cut the same low frequency at once and it doesn't cancel out - the two controls interact instead of nulling, the classic "big and tight" trick, built in rather than simulated. High Boost and High Atten run as two fully independent sections, with an eleven-position switch that goes peaking or shelving. Four VU meters, a tube output stage, twenty factory presets.

  • Interacting Low Shelf - Boost and Atten don't cancel, they compound
  • 11-Position High Frequency - 9 peaking positions plus 2 dedicated shelf positions
  • Independent High Atten - its own shelf, its own frequency, never shared
  • Four VU Meters - Input L/R, Output L/R, always visible
  • 20 factory presets - vocal, bass, drums, mix bus, mastering, and beyond
Introductory Price $9 Perpetual license · 3 activations · Windows, macOS and Linux
Warm Repeats VST3 tape echo and spring reverb

"Three heads, a spring that actually boings, and it's free. I keep forgetting to check the price tag because there isn't one."

- M Media Audio
Tape Echo + Spring Reverb

Warm Repeats

That sounds good. Do it again.

A free multi-head tape echo with an independent spring reverb running alongside it, not stacked on top. Three selectable tape heads combine into seven head patterns, the feedback path carries real tape wobble and warmth that compounds with every repeat, and Fresh/Worn decides how far that character goes. Push Intensity past 100% and the feedback path genuinely self-oscillates.

  • Head Pattern - 7 combinations of Short, Medium, and Long
  • Intensity - 0-115%, self-oscillating past unity
  • Tape Age - Fresh or Worn, two distinct personalities
  • Spring reverb - independent engine, own Reverb Level
  • 22 factory presets - slapback, dub, drone, doubling, and more
⁠Free Free forever · all three platforms
Twin Valve VST3 dual-channel vari-mu compressor

"Add a little butter, and some honey, to your mix. Rich tube warmth. Smooth, flowing compression.

Dual-Channel Vari-Mu Compressor

Twin Valve

A Little Honey for Your Audio.

Rich tube character, smooth vari-mu compression and satisfying weight for tracks, buses and full mixes. Six timing settings, Left/Right and Mid/Side processing, Link, per-channel Mix and Output, Auto-Level and twenty factory presets.

  • Tube Character - Rich harmonics, smooth dynamics and musical weight
  • Six Timing Settings - Four fixed combinations and two program-dependent releases
  • Stereo and Mid/Side - Independent channels with Link for coordinated compression
  • Blend to Taste - Per-channel Mix and Output, plus Auto-Level automatic makeup gain
Introductory Price $49$29 Perpetual license · 3 activations · Windows, macOS and Linux
Room Service VST3 plate reverb

"Dense, beautiful tails that sit behind the track perfectly. Ridiculously good for a free reverb."

- Claire W., Mix Engineer · Bristol, UK
Plate Reverb

Room Service

Suspended steel. Natural decay.

A free plate reverb built to behave like the real suspended-steel units it's styled after - fast, dense buildup, highs that arrive before the lows, and a tail whose tone evolves as it decays instead of just tilting dark. Tube and Solid State character stages carry their own real harmonic signatures, barely there at unity, genuinely driven when you push Input.

  • Decay and Tone - 0.5 to 8 seconds, with an evolving-damping tail
  • Spread - Highs-first dispersion and stereo width, one knob
  • Character - Tube (asymmetric, warm) or Solid State (symmetric, clean)
  • 80Hz Cut - Stepped low shelf, 0 / −4 / −10 / −16 dB
  • 30 factory presets - Send and insert styles, short to long, narrow to wide
⁠Free Free forever · all three platforms
Northstar VST3 finishing console

"A great plugin that offers all the necessary tools for custom mastering... lightweight and its GUI is very pleasant, simple, and intuitive."

- Rastaman81, KVR review
Finishing Console

Northstar

Big sound. One window.

Northstar puts the sound of the entire record under your hands. Shape the tone, control dynamics, add color, set the stereo image and bring the level home, seeing and hearing how each decision affects the mix. Nine processing sections follow the signal from input to output, with an EQ display, reference player and loudness meters alongside the controls.

  • Nine sections - Each with its own power switch, everything starts neutral
  • EQ - Three banks, six bands each, shelf or bell
  • Reference player - WAV, AIFF, FLAC and MP3, with loop and click-to-seek waveform
  • Loudness - Short-Term and Integrated LUFS, True Peak and LRA
$99 Perpetual license · all three platforms
Due Process VST3 four-row compressor

"Different compressor characters on the center and sides? There went my afternoon. Fantastic control."

- Nathan R., Mix Engineer · Nashville, TN
Four-Row Compressor

Due Process

Every channel gets its day in court.

Four complete compressors running at the same time, Channel 1, Channel 2, Mid and Side, with no modes to switch between. Choose FET, Opto, Vari-Mu or VCA for each row, set how hard each one is hit with its own Input, then rebalance with Makeup, Mix and Output. Auto-Level keeps the loudness matched, and a gain-reduction meter on every row shows exactly what each compressor is doing.

  • Four compressors at once - Channel 1, Channel 2, Mid and Side
  • Four characters - FET, Opto, Vari-Mu and VCA, chosen row by row
  • Remix after compression - Input, Makeup, Mix and Output on every row
  • Auto-Level + Delta - Matched loudness, and hear only what is removed
$99 Perpetual license · 3 activations · all three platforms
Internal Affairs VST3 mastering EQ

"Being able to EQ left, right, mid and side together is hard to give up once you’ve tried it."

- Adrian K., Mastering Engineer · Berlin, Germany
Mastering EQ

Internal Affairs

Every channel is under investigation.

A mastering EQ with four complete EQ rows running at the same time - Channel 1, Channel 2, Mid and Side - each with a low cut, four parametric bands and a high cut. Shape left, right, center and sides in one pass, with a Link switch, a Saturation knob you can leave off, Oversampling up to 8x, Delta, Gain Sync, dual VU meters and ten factory presets.

  • Four EQ rows at once - Channel 1, Channel 2, Mid and Side
  • Real mastering controls - Shelf or bell, Q on every band, 6 to 24 dB per octave cuts
  • Saturation + Oversampling - Warm, level-matched, Off, 2x, 4x or 8x
  • Flat means flat - Untouched when nothing is engaged, Delta shows what you changed
$99 Perpetual license · 3 activations · all three platforms
Dirtywork VST3 four-row saturator

"I can give the center some weight and rough up the sides separately. That’s seriously useful."

- Sofia M., Producer · Barcelona, Spain
Four-Row Saturator

Dirtywork

Four saturators. One pass.

Saturation usually goes on the whole mix as a single knob. Dirtywork doesn't. Channel 1 and Channel 2 work on the left and right, then the signal splits into mid and side so the Mid and Side rows work on the center and on the difference between the channels. Every row is a complete saturator with its own Type, Input, Drive, Low Cut, Tone, Mix and Output.

  • Four rows - Channel 1, Channel 2, Mid and Side, fully independent
  • Four types per row - Tube, Tape, Transformer and Diode
  • Auto-Level - Matches output level as you drive each row
  • Delta - Hear exactly what each stage added
$79 Perpetual license · all three platforms
Loose Cannon VST3 wobble filter

"One held note, instant attitude. The stereo wobble is where things get really fun."

- Tyler B., Music Producer · Denver, CO
Wobble Filter

Loose Cannon

Hold to wobble.

A wobble filter locked to your project. Hold Engage and a low frequency oscillator opens and closes a resonant filter in time with the host, so one held bass note becomes a wub, a half-time growl or a talking bass. Spread sends the right channel's wobble behind the left, and two meters show where each side's cutoff is.

  • Rate and Shape - 1/2 to 1/32 synced including triplets, or 0.1 to 20 Hz, in five shapes
  • Four filter modes - Low Pass 12, Low Pass 24, Band Pass and High Pass
  • Depth and Spread - up to six octaves above Cutoff, up to 180 degrees of stereo offset
  • Drive - level-compensated saturation, 2x oversampled
$9 Perpetual license · 3 activations · all three platforms
Repeat Offender VST3 stutter and glitch effect

"Great for those little fills that make a loop feel alive. Chaos earns its name."

- Luca F., Producer · Milan, Italy
Stutter and Glitch

Repeat Offender

Hold to repeat.

Hold Engage and the last slice of your audio repeats on the beat. Pick Stutter, Reverse, Gate or Crush, set the slice length from a 1/4 note to a 1/32, and turn Chaos up when you want it to play itself.

  • Four modes - Stutter, Reverse, Gate and Crush, one at a time
  • Rate - 1/4 to 1/32 synced including triplets, or 5 to 500 ms free
  • Chaos - 0 never fires on its own, up from there glitches trigger randomly
  • No latency - Mix and Output finish the signal
$9 Perpetual license · 3 activations · all three platforms
Full Stop Shop VST3 tape stop

"The stereo stop sounds excellent, and landing back on the beat saves so much fiddling."

- Andre J., DJ / Producer · Atlanta, GA
Tape Stop

Full Stop Shop

Hold to stop.

A tape stop and vinyl brake that works in stereo. Hold Engage and the pitch falls to a stop, let go and it spins back up. Spread makes the left and right channels stop at different moments, and Land On brings the music back exactly on a grid line.

  • Stop Time and Return Time - 50 ms to 4 s, or 1/16 to 2 bars synced
  • Spread - the stop travels from one side of the mix to the other
  • Land On - the return lands on a 1/4, 1/2 or 1 bar line
  • Speed meters - the real playback rate of each side
$9 Perpetual license · 3 activations · all three platforms
More Thyme VST3 slow down effect

"Slowing a phrase down can completely change its mood. This makes it dangerously easy."

- Maya S., Hip-Hop Producer · Toronto, Canada
Slow Down

More Thyme

Your spice rack has a suspiciously large Engage button.

Hold the big Engage button and the audio drops to half speed, a third, a quarter or three quarters, with the pitch following the speed like a tape deck. Let go and it speeds back up. This is what happens when the seasoning instructions just say "trust me."

  • Speed - 1/4, 1/3, 1/2 or 3/4 of normal speed
  • Slow Time and Return Time - 50 ms to 4 s, or 1/16 to 2 bars synced
  • Land On and Recover - back on the grid, then Snap or Nudge to live
  • Speed meters - the playback speed of each side
$9 Perpetual license · 3 activations · all three platforms
Low Res VST3 bit and sample rate crusher

"Proper crunchy nastiness. Blending a little underneath clean drums gives them so much character."

- Felix H., Electronic Musician · Hamburg, Germany
Bit Crusher

Low Res

Hold to crush.

A bit and sample rate crusher you play. Hold Engage and the signal is crushed to the Bits and Rate you set, shown on big digital readouts, let go and it's clean again. Dither, a Tone low-pass, Mix and Output finish the job.

  • Bits - 1 to 16, whole numbers
  • Rate - 500 Hz to 48 kHz
  • Dither and Tone - triangular dither on or off, low-pass from 500 Hz to 20 kHz
  • No latency - at any setting
$9 Perpetual license · 3 activations · all three platforms
Ground Control VST3 subsonic and DC cleanup utility
Subsonic / DC Cleanup

Ground Control

We've identified some unnecessary movement downstairs.

A dynamic subsonic limiter that watches energy at the very bottom of the signal and steps in only when it gets out of line - not a blunt high-pass filter that thins every kick and bass note whether it needs it or not. A separate static HPF (5-60Hz, Off available, 6/12/24dB/oct) handles persistent rumble and cutting prep, and independent DC removal clears offset before either stage touches the signal.

  • HP Filter Freq + Slope - 5-60Hz plus Off, 6/12/24dB/octave
  • Threshold + Release - Release runs 50-1500ms, manual or Auto-Release
  • Dual / Stereo - Independent channels, or shared detection for a stable center
  • DC Removal + Delta - Clears offset before anything else; audition what's removed
$9 Perpetual license · 3 activations · all three platforms
Vinyl Flooring VST3 RIAA equalization utility
RIAA Equalization Utility

Vinyl Flooring

Lay it down. Level it out.

Five record equalization curves in one utility - RIAA, Columbia LP, NAB, AES, and Decca/FFRR 1951. Encode and Decode are true mathematical inverses of the same curve network, Amount scales the curve itself rather than blending dry and wet, and a live EQ Visualization panel draws the response with real PRE/POST spectrum underneath so you can watch your own material reshape.

  • Curve Standard - RIAA, Columbia LP, NAB, AES, Decca/FFRR 1951
  • Direction - Encode and Decode, true inverses of the same network
  • Amount - Scales the curve itself, 0% flat to 100% full strength
  • Mix + Delta - Separate dry/processed blend; audition the curve's own effect
$9 Perpetual license · 3 activations · all three platforms
Cheap Haircut VST3 peak clipper
Peak Clipper

Cheap Haircut

A little off the top.

A peak clipper for real loudness gain without the squash a limiter gives you once you push it too far - it shaves only the samples that actually cross the ceiling, instantly, and leaves everything below that line completely untouched. Hard or Soft clip character, a parallel Mix blend, real anti-aliasing Oversampling, and a live two-color clip scope that shows exactly what's getting trimmed.

  • Input + Threshold - ±12dB drive into a 0 to -24dB ceiling
  • Hard / Soft Clip - Sharp ceiling, or a rounded saturation-like transition
  • Mix + Oversample - Parallel blend, plus real anti-aliasing
  • Delta - Audition only the content that got shaved away
$9 Perpetual license · 3 activations · all three platforms
Upper Management VST3 high-frequency acceleration limiter
HF Acceleration Limiter

Upper Management

Finally, somebody in management does some actual work.

A high-frequency acceleration limiter built on a vinyl-mastering trick: isolate the highs, catch the peaks, blend the correction back in. A phase-coherent crossover splits off everything above the Crossover frequency, a fast peak limiter works that band alone, and Mix blends it back as a parallel signal. Harsh cymbals, sibilance, and brittle transients get handled - the rest of the mix never knows anything happened.

  • Crossover - 1 kHz to 12 kHz, sets where the isolated high band begins
  • Threshold + Release - Manual or fully automatic via Auto-Release
  • Stereo / Dual / Mid-Side - Shared detection, independent channels, or M/S processing
  • Delta + Solo Band - Hear exactly what's being caught before it reaches the mix
$9 Perpetual license · 3 activations · all three platforms
Fifth Order VST3 free dual-channel Class A tube preamp

"Put it on a bass track and immediately liked the extra body. This being free is absurd."

- Owen C., Bassist / Home Recordist · Leeds, UK
Class A Tube Preamp

Fifth Order

A little grease goes a long way.

A free dual-channel Class A tube preamp with Input, Output, Bass, and Treble on each side, all adjustable from −12 to +12 dB. Underneath it sits an always-on coloring stage with no dedicated knob, quietly rounding the edges of whatever passes through. Link hard-locks both channels together, Auto-Level keeps loudness honest as you drive it, and twenty factory presets - considerably more than most paid preamps bother with - are ready to load.

  • Input / Output / Bass / Treble - −12 to +12 dB per channel, both sides independent
  • Hidden coloring stage - Always-on, no dedicated control, part of every signal
  • Link + Auto-Level - Hard-locked channels and RMS input/output level matching
  • 20 factory presets - From Factory Uncalibrated to Felony Headroom
⁠Free No license · no account · all three platforms
Valvewerk VST3 broadcast tube preamp plugin

"The tone switches make you commit quickly. Love the bite it gives a drum bus."

- Daniel V., Recording Engineer · Detroit, MI
Broadcast Tube Preamp

Valvewerk

A broadcast preamp with strong opinions and no indoor voice.

One job, done with considerable attitude. Fixed, hardware-style Mid and Low switches deliver eight authentic tonal combinations - no sweepable EQ, no menus, no forty minutes achieving nothing. Warmth comes standard, living in the signal path the moment you flip it on. Auto-Level holds listening volume steady as you push the Input Level, so you hear what the circuit is doing instead of just hearing louder.

  • Mid + Low Switches - Two fixed-frequency switches, eight authentic tonal combinations.
  • Input Level - Drives the tube character. Paired with Auto-Level so volume never fakes quality.
  • Auto-Level - Holds perceived loudness steady while you push the drive.
  • Fixed Controls - Hardware-accurate switches, not sweepable menus. Positive clicks, definite choices.
$19 Perpetual license · 3 activations · all three platforms
Redline Valve VST3 tube preamp plugin

"Thick, gritty, and very easy to push too far in the best possible way."

- Pavel N., Producer / Guitarist · Prague, Czechia
Tube Preamp

Redline Valve

Soviet-flavored tube muscle with questionable manners.

Five continuous knobs per channel - Input, Bass, Midrange, Treble, and Output - built for weight, not subtlety. Push the Input and the whole signal path leans into it: more body, more grit, more front. Two large VU meters, switchable between Input and Output, watch every decision you make. Link, Auto-Level, and Dual-Stereo controls cover every session from a single channel to a fully independent stereo pair.

  • Five Knobs - Input, Bass, Midrange, Treble, Output. Fully continuous, immediately effective.
  • Switchable VU Meters - Watch Input or Output on demand, per channel or linked.
  • Auto-Level - Keeps loudness honest while you drive the Input harder.
  • Link + Dual-Stereo - Run both channels locked together or fully independent.
$19 Perpetual license · 3 activations · all three platforms
Reference Two VST3 dual-channel tape machine

"Lovely subtle tape character at sensible levels. Push it harder and it gets interesting fast."

- Elise B., Engineer · Montreal, Canada
Tape Machine

Reference Two

Precision by default, driven on request.

Reference Two begins with a clean, calibrated tape path and gives you complete control over how far you take it. Each channel offers an Input, Sync and Reproduce monitor selector, three genuine points in the tape signal path, while a shared Uncalibrate switch keeps Record and Reproduce locked to reference until you decide otherwise.

  • Input, Sync, Reproduce - Three distinct monitor paths per channel
  • Uncalibrate - One switch unlocks Record and Reproduce together
  • 15/30 IPS + Auto-Level - Global speed switch, level held steady under drive
  • Dual VU + 11 presets - From The Expensive Machine to The Good Kind of Damage
$39 Perpetual license · 3 activations · all three platforms
Master 30 VST3 dual-channel tape machine

"The separate record and reproduce controls make finding the sweet spot feel really natural."

- Graham S., Engineer · Edinburgh, UK
Tape Machine

Master 30

A killer dual-channel tape machine, no nervous breakdown required.

Master 30 gives every channel its own Record and Reproduce stage, each with a separate Manual/Preset switch. Leave a stage on Preset and it stays locked to its calibrated reference. Switch it to Manual and the knob comes alive, so you decide exactly which stage gets to move.

  • Manual/Preset per stage - Record and Reproduce lock or unlock independently
  • Bias + Phase - Real per-channel controls, not panel decoration
  • Instant Calibration - Return any channel to factory reference immediately
  • Dual VU + 10 presets - Gentle Warmth through Full Drive
$39 Perpetual license · 3 activations · all three platforms
Studio 15 VST3 dual-channel tape machine

"The little bit of movement makes programmed drums feel less rigid. Lovely texture."

- Ben A., Drummer / Producer · Minneapolis, MN
Tape Machine

Studio 15

Built like a tank. Analog character preserved.

Studio 15 runs two independent tape channels, each with its own REC, REP, BIAS, HF Trim and IEC/NAB curve, driven by a shared transport. Output Select switches the whole machine between Input, Sync and Repro monitoring, while real modulated-delay wow and flutter keeps the movement alive instead of sounding like an EQ curve wearing nostalgia.

  • REC, REP, BIAS, HF Trim - Full tape control set on both channels independently
  • Function per channel - Remove either side from tape processing alone
  • 7.5/15 IPS + Reel Size - Shared transport, two speeds, flutter character shift
  • Dual VU + 10 presets - Clean and calibrated through well past midnight
$39 Perpetual license · 3 activations · all three platforms
West Coaster VST3 opto bus compressor

"Just a touch across the mix and everything feels more connected. Still plenty of room to breathe."

- Julian E., Mix Engineer · Los Angeles, CA
Opto Bus Compressor

West Coaster

Make the mix finished.

West Coaster is a dual-channel opto bus compressor built to make a mix feel richer, wider and unmistakably finished without squeezing the life out of it. Its slow, program-dependent detector moves with the music instead of imposing itself on top of it, and a restrained saturation stage adds polish rather than drive.

  • Threshold + AUTO Release - Gentle knee tuned to kiss material, program-dependent recovery
  • External Sidechain - Duck or shape reduction from any source
  • Stereo, Dual, Mid-Side - Full Link control, independent or matched channels
  • Auto-Level + dual VU - Switchable Gain Reduction or Output metering
$49 Perpetual license · 3 activations · all three platforms
Howdy Compressor VST3 fast VCA bus compressor

"Snappy and straightforward. Got the drum bus punching in about thirty seconds."

- Travis M., Recording Engineer · Fort Worth, TX
VCA Bus Compressor

Howdy Compressor

Howdy does not mosey.

Howdy Compressor is a genuinely fast, punchy VCA-style bus compressor with a hard knee and a single envelope follower for classic glue character. Attack reaches 2 ms, Left and Right can run together or fully independently, and the whole panel reacts to real signal moving through it.

  • Fast Attack - 2 to 200 ms, tuned for immediate response
  • Four Ratios - 1.5:1, 2:1, 3:1 and a real 6:1
  • Stereo, Dual, Mid-Side - Link ties both channels together when you want it
  • Auto Level + Mix - Output compensation plus parallel blend, 11 factory presets
$19 Perpetual license · 3 activations · all three platforms
Lake Ontario VST3 vari-mu bus compressor and EQ

"The compression and EQ work beautifully together. Easy to get warmth without losing definition."

- Hannah R., Producer / Engineer · Ottawa, Canada
Vari-Mu Bus Compressor

Lake Ontario

Glue that breathes.

Lake Ontario pairs vari-mu compression with a musical 4-band EQ on every channel, Low and High shelves plus Low-Mid and High-Mid bells. An always-on micro-saturation stage keeps things warm even with Saturation at zero, and a reorderable signal path lets the EQ work before or after the compressor.

  • Vari-Mu glue - Threshold, Attack, Release and a 4-position Ratio
  • 4-band EQ per channel - Low/High shelves, Low-Mid/High-Mid bells
  • EQ Order switch - Shape tone before compression or after it
  • Auto Level + 9 presets - Bus glue, vocal warmth, drum punch, mastering and Mid-Side
$49 Perpetual license · 3 activations · all three platforms
Leadfoot VST3 kick drum channel strip

"Everything I reach for on a kick, right there. The attack and sub controls are particularly good."

- Chris D., Metal Producer · Pittsburgh, PA
Kick Drum Channel Strip

Leadfoot

Fix the source.

Leadfoot is a complete kick drum processing channel strip built around one source instead of merely sporting a kick-sounding name. Gate and a focused EQ clean the signal first, a two-knob transient shaper handles attack and sustain, and the compressor, saturation and sub generator take it the rest of the way.

  • Gate + EQ - Switchable HPF/LPF plus three parametric bands for thump and click
  • Transient Shaper - Independent attack and sustain control
  • Compressor + Saturation - Ratios up to 20:1, auto attack/release, driven saturation stage
  • Sub Generator + 7 presets - Blendable low-end thump, trap through metal and broadcast
$39 Perpetual license · 3 activations · all three platforms
Dualtronix VST3 dual-channel opto leveling amplifier

"Two knobs and the vocal settles into place. Sometimes that’s all you need."

- Nina K., Vocal Producer · Stockholm, Sweden
Opto Leveling Amplifier

Dualtronix

Killer opto glow.

Dualtronix is a dual-channel opto leveling amplifier built around the simple control set that has made this style of hardware sound great for decades: Gain and Peak Reduction, nothing to overthink. Each channel runs its own Power switch and meter, so you can run matched glue or two completely different characters side by side.

  • Gain + Peak Reduction - The whole control surface, the way opto leveling has always worked
  • Two independent channels - Own Power switch and meter per side, Link when you want them matched
  • Comp / Limit switch - A genuinely different character, not just a number change
  • SC HPF + Auto Level - Keeps low end out of the detector, light smoothing without a volume trick
$19 Perpetual license · 3 activations · all three platforms
Studio 351 VST3 dual-channel Class A tape preamp interface

"Adds that little bit of weight that makes a thin track feel substantial. Easy to like."

- Aaron L., Songwriter / Producer · Asheville, NC
Class A Tape Preamp

Studio 351

Straight off bypass, it's already working.

A dual-channel Class A tape-preamp-style preamp that sounds better than bypass the moment you turn it on - fixed low-mid weight and retuned tube saturation do that work before you touch a single knob. Input, Bass, Treble, and Output per channel, plus a Character EQ knob (Warm, Flat, Air) that recolors the whole plugin at once.

  • Always-on Class A character - Fixed low-mid weight and retuned tube saturation, zero setup required
  • Character EQ - Warm / Flat / Air, one knob, recolors both channels at once
  • Mono / Stereo / Dual - Three channel modes plus a Link toggle
  • Dual VU metering - Switchable between Input and Output
$39 Perpetual license · 3 activations · all three platforms
Leveler Control VST3 opto-style leveling amplifier interface

"The gain matching makes dialing in compression much easier. Smooth on vocals, too."

- Beth C., Recording Engineer · Glasgow, UK
Opto Leveling Amplifier

Leveler Control

Hear the compression, not the volume.

An opto-style leveling amplifier with a real trick built in: an Auto Gain Match switch that continuously trims the output to hold your level steady as you turn Peak Reduction, so you're hearing the character of the compression, not just more volume. Gain, Peak Reduction, a sidechain high-pass, and a Compress/Limit switch are the whole signal path - simple, smooth, and honest about what it's actually doing.

  • Auto Gain Match - Continuously trims output to hold level steady as Peak Reduction changes
  • Gain + Peak Reduction - Input drive into the opto cell, plus reduction amount independent of level
  • Compress / Limit - Single switch, gentle glue or a harder ceiling
  • SC HPF - Keeps low end out of the detector so bass doesn't drive the reduction
$19 Perpetual license · 3 activations · all three platforms
Anaheim VST3 dual-channel tube mic pre and compressor interface

"Great body and movement on bass. The parallel blend lets me keep the original attack."

- Rafael P., Producer / Bassist · São Paulo, Brazil
Mic Pre, Compressor, EQ

Anaheim

A mic pre, a compressor, and an EQ. One insert.

Dual-channel tube mic pre and compressor with a beefy Vari-Mu gain stage and a built-in 2-band EQ. The Input knob drives a tube stage automatically, the Vari-Mu compressor breathes with the material instead of just controlling peaks, and Mix blends it all back against the dry signal for New York-style parallel compression.

  • Tube-driven Input - Character builds automatically as you push it, no separate drive knob
  • Vari-Mu compressor - Threshold, Attack, Release, sidechain high-pass, fixed ratio
  • Stereo / Mono / Dual - Three channel modes plus a Link toggle, dual channel makes things huge
  • Dual metering - Dedicated compression meter and output VU on every channel
$49 Perpetual license · 3 activations · all three platforms
Reference Player - mastering-grade desktop audio player interface

"My music collection, useful EQ, and proper meters in one player. Finally, something made for my ears."

- Peter A., Music Enthusiast · San Diego, CA
Not a Plugin - The Player

Reference Player

It just sounds better.

A mastering-grade desktop audio player, not a plugin, but built by the same engineers with the same ears. Your media files, CDs, and a line input all in one player, running through a mastering-grade 31-band EQ and a VCA compressor/limiter to get more out of the speakers and headphones you already own. Five themes, limitless colors.

  • 31-band EQ - Mastering-grade graphic EQ on everything you play
  • VCA compressor/limiter - Built in, always available, no separate chain to build
  • CD ripping + line input - Files, discs, and a live input, all in one player
  • 5 themes - Including the 70s Hi-Fi flagship look, limitless color options
⁠Free No subscription · Windows + Linux
Third Rail VST3 31-band tube graphic equalizer interface

"Turns out I missed grabbing graphic EQ faders. The tube drive is a very nice bonus."

- Victor H., Mix Engineer · Rotterdam, Netherlands
31-Band Tube Graphic EQ

Third Rail

A real graphic EQ, not a parametric wearing a costume.

A tube-driven stereo 31-band 1/3-octave graphic equalizer - real ISO center frequencies, one fader per band, ±24 dB of range. Drive comes from the INPUT knob the way it works on real tube gear; push it hard and the saturation kicks in on its own, no separate drive knob to ride. A vari-mu-style compression stage runs underneath at a fixed character. Then there's COLOR: a knob that does nothing to the sound and everything to the feel, recoloring the fader highlights and LED meters live.

  • 31 real bands - Full ISO 1/3-octave center frequencies, 20 Hz - 20 kHz, ±24 dB per band
  • Input-driven saturation - Push INPUT hard for tube character, real hardware behavior, no separate drive knob
  • COLOR knob - Continuous hue, recolors faders and meters live, zero effect on the signal
  • 10 factory presets - Warm Bus, Air Lift, Broadcast Voice, Tape Glow, and more, plus Flat
$39 Perpetual license · 3 activations · all three platforms
The New Yorker VST3 dual-channel Vari-Mu compressor plugin

"A little parallel compression makes the whole mix feel fuller. This one has real charm."

- Jamal W., Producer / Mix Engineer · Brooklyn, NY
Vari-Mu Compressor

The New Yorker

The gluiest mix glue you've ever heard.

Dual-channel Vari-Mu bus compressor built to weld a mix together, not just turn it down. Stereo, Dual, and Mid-Side modes cover everything from linked bus glue to independent per-channel control to serious stereo-field shaping. An always-on micro-saturation stage adds harmonic weight to everything that passes through. Eight factory presets, A/B instant recall, full save/import/export. Two VU meters switch between gain reduction and output level.

  • Vari-Mu Glue - Program-dependent attack/release that breathes with the material, not against it.
  • Stereo / Dual / Mid-Side - Linked bus glue, fully independent channels, or center/side control. Link ties it together when you want it.
  • Mix Knob - Classic New York parallel compression - blend wet against dry, per channel.
  • Built-In Saturation - Tube-style harmonic weight baked into the signal path, always on.
$49 Perpetual license · 3 activations · all three platforms
Broadcast Foundry VST3 American tube preamp plugin

"Really like it on voice. Adds some chest and presence without needing a complicated chain."

- Laura F., Producer · Seattle, WA
American Tube Preamp

Broadcast Foundry

Flip it on. It already sounds better.

Dual-channel American tube preamp. Two independent channels - each with Input, Bass, Treble, and Output. Drive the Input and the character builds: grit on the drums, teeth in the low end, presence in the mids. Three channel modes cover every routing scenario. Ten factory presets load ready. Two analog VU meters watch the output. At $19 it belongs on everything that needs to feel less digital.

  • Input + Output - Drive the character in, set where it lands. Four knobs per channel, all of them useful.
  • Bass + Treble - Low and high shelves at exactly the frequencies that matter.
  • Dual Mode - Fully independent per channel. Each side on its own drive, its own response, its own schedule.
  • Mono / Stereo / Dual - Sums to mono, runs linked, or runs completely independent. Nothing left uncovered.
$19 Perpetual license · 3 activations · all three platforms
Iron Deck VST3 dual-channel tape machine strip

"A little tape weight across a few tracks adds up beautifully. An excellent freebie."

- Ethan J., Home Studio Musician · Madison, WI
Tape Machine Strip

Iron Deck

Two channels of real iron on every insert.

Dual-channel tape machine strip with independent controls per channel. REC drives the nonlinear saturation and natural RMS compression. REP brings it out the other side. Three signal path modes, IEC or NAB playback EQ, bias trim, tape speed shelving, HF rolloff, and calibrated VU meters. The glue tracks get from real iron - free.

  • REC + REP - Input drive into tape saturation and RMS compression; output level post all processing
  • REPRO / INPUT / SYNC - Full tape reproduce path, clean record amp path, or sync head character
  • IEC / NAB - European or American playback EQ curve, active in all three modes
  • Tape Speed - 7.5, 15, or 30 IPS with matched LF/HF shelving per speed
⁠Free No license · no account · all three platforms
Monster Factory VST3 complete channel strip interface

"Got an aggressive vocal sitting in the track without opening half my plugin folder."

- Alex G., Alternative Rock Producer · Philadelphia, PA
Brutal Vocal Buss Channel Strip

Monster Factory

Gate to limiter in one insert.

A complete signal chain in a single plugin: noise gate, high-pass filter, compressor, tone EQ with de-esser, four-mode parallel saturation, stereo doubler, slapback delay, reverb with sidechain ducking, output gain, and a brickwall limiter with adjustable ceiling. Every stage designed to work with the ones around it. Drop it on a track and dial in as much of each stage as the track needs.

  • Grind - Four parallel saturation modes: TAPE, TUBE, AMP, BROKEN - dry signal never touched
  • Doubler - Schtack thickness, Humanize micro-variation, Widen stereo spread
  • Slapback - Schlapp send, 60-180ms delay time, 0-35% feedback
  • Reverb - S/M/L rooms with Duck sidechain control
$39 Perpetual license · 3 activations
Orbit VST3 3D circular autopanner interface

"The movement has a sense of depth that ordinary panning doesn’t. Brilliant on headphones."

- Freya T., Sound Designer · Copenhagen, Denmark
Space Exploration 3D Autopanner

Orbit

Real depth, not just left-right.

A circular autopanner that uses three simultaneous psychoacoustic techniques: equal-power panning, inter-aural time difference (up to 650µs Haas delay on the far ear), and a front-back EQ axis that rolls off from 18kHz at the front to 4kHz at the rear. All three follow the same LFO position so the brain hears a coherent circular motion. Rate runs free or locks to seven tempo subdivisions. Width extends to 200%.

  • Three-axis motion - Pan, volume, and EQ axis driven from a single LFO position
  • ITD - Up to 650µs Haas delay tracks pan position for binaural depth
  • Tempo sync - 4 bars to 1/16 note, seven subdivisions
  • 9 factory presets - Planetary Orbit loads by default
$39 Perpetual license · 3 activations
Curve Control VST3 mix and mastering parametric EQ interface

"Precise enough for small mastering moves, with enough character to make them feel musical."

- Thomas B., Mastering Engineer · Vienna, Austria
World-Class Mix & Mastering EQ

Curve Control

Twelve bands, three channel modes, hardware weight, and a full set of professional monitoring tools.

A dual-channel mix and mastering parametric EQ with six fully parametric bands per channel, three operating modes (Link, Dual L/R, M/S), always-on level-dependent harmonic saturation, oversampling up to 8x, and Delta, Gain Sync, and Mono monitoring built in. Two large VU meters with switchable source. Everything needed for a complete mix or mastering session on one plugin.

  • Link / Dual / M/S - Ganged stereo, fully independent L/R, or Mid-Side with separate curves per channel
  • Six parametric bands - High-pass, low shelf/bell, two mid bells, high shelf/bell, low-pass - each with independent Q and enable
  • Delta monitoring - Hear only what the EQ is adding or removing; near-silence on a flat curve
  • Oversampling - Off / 2x / 4x / 8x wraps the saturation stage only, minimizing added latency
$49 Perpetual license · 3 activations
Sugar Engine VST3 vocal channel strip interface

"Compression, EQ, de-essing and a little width - my vocal chain became a lot simpler."

- Olivia N., Singer / Producer · Brighton, UK
Vocal Channel Strip

Sugar Engine

One plugin. Every stage of a vocal.

A complete vocal processing chain in one insert: opto compressor, six-band parametric EQ, dual de-esser, and stereo doubler. Each stage operates independently and bypasses cleanly. Run the full chain or use any section on its own. No oversampling, no added latency - works at the same settings in the studio and live in-the-box.

  • Opto compressor - Two-stage photocell release, single Peak Reduction control, Auto mode, VU meter reads GR or input
  • Six-band parametric EQ - HPF, two low-mid bands, fully parametric mid with adjustable Q, air band, LPF
  • Dual de-esser - De-esser 1 targets sustained sibilance (6-10 kHz); De-esser 2 targets hard consonant transients (4-8 kHz)
  • Stereo doubler - Short delay + slow modulation, mono in / stereo out, sounds like a second take not chorus
$39 Perpetual license · 3 activations
The Black Clamp VST3 dual-channel FET compressor interface

"Gets drums right up front. The parallel mix lets me keep the punch and add the aggression."

- Derek S., Drum Recording Engineer · Cincinnati, OH
FET Compressor

The Black Clamp

Fast, punchy, and forward.

A dual-channel FET compressor built on the classic JFET gain-reduction topology - the same circuit character behind some of the most recognizable compression sounds in recorded music. Two fully independent channel strips with complete per-channel control. Link them for stereo, run independently for dual mono, or flip to M/S mode for bus and mastering work.

  • JFET topology - Classic FET gain-reduction character: fast transients, harmonic color, and natural glue
  • Dual independent channels - Full per-channel control over every parameter on both strips
  • Stereo / Dual Mono / M/S - Three link modes cover tracking, mixing, and mastering use cases
  • SC HPF - Sidechain high-pass filter keeps low-end from driving the compression unnecessarily
$39 Perpetual license · 3 activations
Magic Buss VST3 three-stage bus compressor interface

"Changing the compressor order makes a bigger difference than I expected. Lots of useful flavors here."

- Sebastian R., Mix Engineer · Munich, Germany
Bus Compressor

Magic Buss

Three compressors. One chain. Your call on the order.

Three compressor stages in series - FET, VCA, and Vari-Mu - each with its own parallel blend knob. Stack all three for a full-character bus treatment. Use one. Use two. Bypass what you don't need. An Order switch puts any character first in the chain and changes how the downstream stages respond. A six-band parametric EQ and saturation stage complete the chain.

  • Three compression stages - FET, VCA, and Vari-Mu in series, each with an independent blend knob
  • Order switch - Reorder the compressor chain and hear how each topology responds differently in position
  • Six-band parametric EQ - Full post-compression tone shaping built into the chain
  • Saturation stage - Adds density and harmonic color before the output gain trim
$49 Perpetual license · 3 activations
The Mad Scientist VST3 parallel compressor interface

"Blending in the crushed signal gives drums weight without flattening the groove. Love the tube edge."

- Miles P., Producer / Drummer · New Orleans, LA
Parallel Compressor

The Mad Scientist

Parallel compression with a tube heart.

A parallel RMS compressor with even-order harmonic saturation baked directly into the input stage. Drive the input and the tubes light up. Back off and it cleans up. Fixed 4:1 ratio keeps the compression musical without requiring you to think about it. The Mix knob blends the compressed signal against the dry for natural-sounding parallel results at any setting.

  • Tube input stage - Even-order harmonic saturation follows input gain, no separate drive knob needed
  • Parallel Mix knob - Blend compressed and dry signals for natural parallel compression at any ratio
  • M/S mode - Independent mid and side channel processing keeps stereo width intact under heavy compression
  • Auto-release - Program-dependent release adapts fast when working hard, slow when barely touching
$39 Perpetual license · 3 activations
Volume Dealer VST3 mastering limiter interface

"Clear loudness metering and a straightforward way to hit my target. A very useful free tool."

- Emma D., Musician · Wellington, New Zealand
Mastering Limiter

Volume Dealer

Measure. Target. Deliver.

True-peak lookahead limiter with a full BS.1770 LUFS metering suite. Play your track once, set a target loudness, click Set Level - the corrective gain is applied in one step. The brickwall ceiling holds from there. High Quality mode adds 2x oversampling to catch inter-sample peaks before they clip on playback.

  • Set Level - Measures integrated LUFS and applies the exact gain correction to hit your target in one click
  • Full LUFS suite - Integrated, momentary, and short-term loudness displayed in real time alongside gain applied, gain reduction, and output peak
  • High Quality mode - 2x oversampling via IIR half-band polyphase filter for true inter-sample peak detection
  • Dithering - Off, 24-bit, and 16-bit noise-shaped dither for final export at any bit depth
⁠Free No license · no account · all three platforms
Violet Crown VST3 interface

"The separate boost and cut controls are surprisingly addictive. Lovely tone shaping for zero dollars."

- Caleb W., Songwriter / Home Recordist · Tucson, AZ
Channel Strip

Violet Crown

Six filters. A bus compressor. Zero dollars.

A stereo channel strip built around the EQ and compression character that defined the sound of major-label bus processing. Three independent EQ bands - each with separate boost and cut controls - feed a custom RMS compressor with program-sensitive auto-release. No demo mode. No time limit. No license key.

  • Six independent filters - Separate boost and cut per band: two low shelves, two mid peaks, two high shelves
  • RMS bus compressor - Per-channel detection, auto-release mode, 1.5:1 to 8:1
  • EQ-first or Comp-first - Routing toggle, input trim, and -10/+10 dB makeup gain
  • Dual VU meters - 300 ms ballistic RMS, independent L/R
⁠Free No license · unlimited installs · all three platforms
Velvet Crush VST3 interface

"Helps bright mixes stay open without getting tiring. Especially nice on busy cymbals."

- Isabel L., Mix Engineer · Lisbon, Portugal
High-Frequency Balance

Velvet Crush

Air and presence, without the edge.

Monitors six high-frequency bands relative to the overall signal and corrects when presence or air pulls too far forward. Harshness removed before it sets in. The high end extends naturally without fatiguing, regardless of the source.

  • Six-band monitoring - Presence, edge, clarity, sparkle, air, and ultra tracked in real time
  • Three character modes - Silk, Velvet, and Air define the correction threshold across all six bands
  • Blend knob - Parallel correction chain keeps the processing out of the way until you need it
  • Pilot light - Lights when correction is active so you see it working
$19 Perpetual license · 3 activations
Speaker Breaker VST3 interface

"Gets the low end under control while keeping it big. Much easier to judge the bass balance."

- Noah F., Electronic Producer · Vancouver, Canada
Low-End Balance

Speaker Breaker

Keep your low end honest.

Monitors five low-frequency bands relative to the overall signal level and automatically corrects when any band dominates the mix. Not a limiter. A spectral balance check that keeps the sub, kick, and bass in proportion regardless of how loud you push it.

  • Five-band monitoring - Sub, kick, bass, upper bass, and mid tracked in real time
  • Three contour modes - Warm, Neutral, and Open set how aggressively each band is managed
  • Blend knob - Parallel correction chain, add exactly as much as the track needs
  • Pilot light - Lights when correction is active so you see it working
$19 Perpetual license · 3 activations
Alternate Timeline VST3 interface

"The era settings are great starting points. A small blend adds a lot of personality."

- Leo M., Producer / Composer · Paris, France
Mastering

Alternate Timeline

Shape your sound across the eras.

Six decades of mastering character in a single processor. Pick the era, set the blend, and dial in the tone. Each setting applies the EQ curve, compression behavior, and harmonic profile of that era's best rooms.

  • Six era presets - 1960s through Modern, each with matched EQ and compression character
  • Bottom / Middle / Top - Three-band tonal shaping layered on top of era processing
  • Blend knob - Full parallel processing chain, from a hint to full commitment
  • Dual VU meters - Analog-style ballistics, input and output
$39 Perpetual license · 3 activations

More plugins in development.

Each tool comes from a specific problem heard in the studio. When the next one is ready, it ships. Get in touch if you have a request.

Built in Austin

Creative tools from broadcast engineers.

M Media Audio has worked in professional audio since 1994. Our plugins grow out of real-world mixing and mastering workflows, combining proven techniques with practical tools developed across decades of sessions. Each one is designed to solve problems cleanly, encourage creativity, and deliver reliable results in VST3 format.

  • 32+ years of pro audio broadcast production
  • Thousands of mastered and mixed records and broadcasts
  • Native C++ DSP
  • Perpetual license - no subscription, ever
35+ Years in the chair
1000's Mastered tracks
VST3/AU Windows, macOS and of course Linux
∞ No subscription. Ever.

Built in Austin by engineers who still sit in the chair. Every tool comes from an idea and solution heard in real sessions.

∞

Perpetual License

Pay once. Yours forever. No subscription, no renewal, no cloud dependency.

◾

3 Activations

Studio, laptop, and backup machine.

🔒

Secure & Private

Encrypted activation over HTTPS. No telemetry. Nothing phoning home during your session.

✉

Direct Support

You email us, a human answers. No ticket queue. No knowledge base maze.

Quick answers.

What format are the plugins?

VST3, 64-bit on Windows 10/11, macOS 11 Big Sur or later, and Linux. AU format also available on macOS for Logic Pro, GarageBand, and MainStage. Works in any VST3-compatible host.

Is there a subscription?

Never. One purchase, permanent license. No renewals, no monthly fees, no cloud dependency.

How does activation work?

Enter your license key in the plugin after purchase. Activates over HTTPS in seconds.

How many machines?

Three simultaneous activations per license. Studio desktop, laptop, backup. Need to move a license? Email us.

What is the refund policy?

30 days, no questions asked. Email us and we handle it the same day.

Are demos available?

Audio demos are on each product page. All paid plugins run in demo mode before purchase - fully functional with a brief silence every 30 seconds.

From the Industry

Pro Audio

Audio Log

From the studio.

32 years in the room before the code.

Mastering, mixing, and broadcast production, Austin, TX, since 1994. That's where these plugins actually come from.